1、本机适用于各种PVC运动地板、塑料、金属等平面涂装，经本机涂布的油漆表面光滑、饱满度好、色差小、光泽度均匀。
2、本机采用PLC控制系统，操作便捷迅速。
3、电光轮和胶轮的运转由独立的变频器和减速机控制精密度。
4、刮刀耐磨、耐溶剂。
5、本机可涂布各种油漆，如UV.NC等涂料回收迅速减少浪费。
6、工件涂布可控制在5-10g/㎡之间。

1、The machine is suitable for all kinds of PVC sports flooring, plastic, metal, such as surface coating, the coating machine of the paint surface is smooth, good plumpness, nearly without off color, luster evenly.
2、 The machine adopts PLC control system, operation convenient quickly.
3、Electric operation by independent wheel and tire machine of decelerate of inverter and control precision.
4、Configuration scraper, solvent resistance.
5、The machine can be coated all kinds of paint, such as UV, NC coating recovery quickly less waste.
6、Workpiece coating can be controlled between 5-10 g / ㎡.

1、本机适用于各种PVC地板、塑料、金属等平面涂装，经本机涂布的油漆表面光滑、饱满度好、色差小、光泽度均匀。
2、本机采用PLC控制系统，操作便捷迅速。
3、电光轮和胶轮的运转由独立的变频器和减速机控制精密度。
4、刮刀耐磨、耐溶剂。
5、本机可涂布各种油漆，如UV.NC等涂料回收迅速减少浪费。
6、工件涂布可控制在5-10g/㎡之间。

1、The machine is suitable for all kinds of PVC flooring, plastic, metal,such as surface coating,the coating machine of the paint surface is smooth, good plumpness, luster evenly.
2、The machine adopts PLC control system, operation convenient quickly.
3、Electric operation by independent wheel and tire machine of decelerate of inverter and control precision.
4、Configuration scraper, solvent resistance.
5、The machine can be coated all kinds of paint, such as UV, NC coating recovery quickly less waste.
6、Workpiece coating can be controlled between 5-10 g / ㎡.

1、本机适用于各种木器、塑料、金属等平面涂装，经本机处理过的油漆表面光滑，饱满度好，色差小。
2、电光轮和胶轮的运转由独立的变频器和减速机控制，精密度高。
3、配置PU刮刀，耐磨、耐各种溶剂。
4、本机可涂布各种油漆，如PU/UV/NC等，涂料回收迅速、减少浪费。
5、工件涂布可控制在5-10g/m2之间。

1、This machine can be used for different kinds of wood ,plastic and metal products. It can ensure the surface of the paint to be smooth ,with good plumpness ,and less chromatic difference.
2、The electronic roller and rubber roller are controlled independently by transducer and redactor ,which can guarantee the precision.
3、The doctor of this machine is imported PU doctor which can be anti-abrasive and resistant to all solvent.
4、This machine can coat all kinds of paint , such as PU UV NC and so on . And the paint can be reclaimed without wastage .
5、The work piece coating can be controlled between 5-10g/m2.

1、本机用于填充原刨花板中密度刨花或其它使用水性、uv光固化填充剂的板材。
2、本机能将板材凹进去的毛孔填平，达到平滑的效果，并将多余油漆刮走回收利用，从而提高生产率。
3、输送带、名胶轮采用独立动力传动，分别由变频器调节速度，从而提高涂装效果。
4、输送带可耐各种溶剂，防止起屑打滑现象。

1、This machine can be used to fill the particle board with the middle density excelsior , it can also do the same for the other boards which use the water-based ,UV coagulated filler .
2、This machine can fill the dented holes of the board to make it smooth , and reclaim the redundant paint to use again .
It can improve the efficiency to a larger extent .
3、The conveyor and rubber rollers are independently actuated by the motor and controlled by the transducer so that it can do the better quality of painting.
4、The conveyor is resistant to kinds of solvent ,and can prevent slipping from happening.